压缩载荷下织构对冷轧和退火板力学行为各向异(4)
【作者】网站采编
【关键词】
【摘要】[16]MAO Z N,AN X H,LIAO X Z,et grain size dependence of strain rate sensitivity of copper at low vs high strain rates[J].Materials Science &Engineering A,2018,738:430-438. [17]BUNGE H analysis in ma
[16]MAO Z N,AN X H,LIAO X Z,et grain size dependence of strain rate sensitivity of copper at low vs high strain rates[J].Materials Science &Engineering A,2018,738:430-438.
[17]BUNGE H analysis in materials science-mathematical methods[M].London:Butterworths Press,1982:47-90.
[18]LüKE K,POSPIECH J,VIRHICH K H,et al.On the problem of the reproduction of the true orientation distribution from pole figures[J].Acta Metallurgica,1981,29(1):167-185.
[19]SACHS E Z.Zur ableitung einer fliessbedingung[J].Zeitschrift Verein Deutsche Ingen,1928,72:734-736.
[20]TAYLOR G strain in metals[J].Journal of the Institute of Metal,1938,62:307-324.
[21]BISHOP J F W,HILL R.A theory of the plastic distortion of a polycrystalline aggregate under combined stresses[J].Philosophical Magazine,1951,42(327):414-427.
[22]BISHOP J F W,HILL R.A theoretical derivation of the plastic properties of a polycrystalline face-centred metal[J].Philosophical Magazine,1951,42(334):1298-1307.
[23]CHEN Zhiyong,ZHANG Xinming,LIU Chuming,et surfaces for{111}〈110〉slip and{111}〈112〉twinning in fcc metals[J].Journal of Materialia Science,2002,37(13):2843-2848.
文章来源:《固体力学学报》 网址: http://www.gtlxxbzz.cn/qikandaodu/2021/0226/444.html
上一篇:固体力学发展趋势断裂与损伤研讨会在清华大学
下一篇:基于模型的钢本构参数识别及验证