基于模型的钢本构参数识别及验证(4)
【作者】网站采编
【关键词】
【摘要】ZHANG Wei, WEI Gang, XIAO Xinke. Constitutive relation and fracture criterion of 2A12 aluminum alloy[J]. Acta Armamentarii, 2013, 34(3): 276-282. [2] JOHNSON G R, COOK W H. A constitutive model and da
ZHANG Wei, WEI Gang, XIAO Xinke. Constitutive relation and fracture criterion of 2A12 aluminum alloy[J]. Acta Armamentarii, 2013, 34(3): 276-282.
[2] JOHNSON G R, COOK W H. A constitutive model and data for metals subjected to large strains, high strain rates and high temperatures[C]∥Proceedings of the seventh international symposium on ballistics. Hague, 1983.
[3] 赵琳. 45钢热处理工艺及其组织性能[J]. 机械工程与自动化, 2012(5):203-204.
ZHAO Lin. Heat treatment technology of 45 steel and its microstructure and properties[J]. Mechanical Engineering & Automation, 2012(5):203-204.
[4] 胡昌明, 贺红亮, 胡时胜. 45号钢的动态力学性能研究[J]. 爆炸与冲击, 2003, 23(2):188-192.
HU Changming, HE Hongliang, HU Shisheng. A study on dynamic mechancial behaviors of 45 steel[J]. Explosion and Shock Waves, 2003, 23(2):188-192.
[5] 陈刚, 陈忠富, 陶俊林,等. 45钢动态塑性本构参量与验证[J]. 爆炸与冲击, 2005, 25(5):451-456.
CHEN Gang, CHEN Zhongfu, TAO Junlin, et al. Investigation and validation on plastic constitutive parameters of 45 steel[J]. Explosion and Shock Waves, 2005, 25(5):451-456.
[6] 李国和, 王敏杰. 淬硬45钢在高温、高应变率下的动态力学性能及本构关系[J]. 爆炸与冲击, 2010, 30(4):433-438.
LI Guohe, WANG Minjie. Dynamic mechanical properties and constitutive relationship of hardened steel (45HRC) under high temperature and high strain rate[J]. Explosion and Shock Waves, 2010, 30(4):433-438.
[7] 汤祁, 熊良山, 邢万强,等. 反求材料JC本构方程系数方法的改进[J]. 兵器材料科学与工程, 2015, 38(3):73-76.
TANG Qi, XIONG Liangshan, XING Wanqiang, et al. Improvement in inverse identification of JC constitutive equation parameters[J]. Ordnance Material Science and Engineering, 2015, 38(3):73-76.
[8] 金山, 汤铁钢, 孙学林, 等. 不同热处理条件下 45 钢柱壳的动态性能[J]. 爆炸与冲击, 2006, 26( 5) : 423-428.
JIN Shan, TANG Tiegang, SUN Xuelin, et al. Dynamic characteristics of 45 steel cylinder shell by different heat treatment conditions[J]. Explosion and Shock Waves, 2006, 26(5): 423-428.
[9] DENG Y, WEI Z, YANG Y, et al. Experimental investigation on the ballistic performance of double-layered plates subjected to impact by projectile of high strength[J]. International Journal of Impact Engineering, 2014, 70(8):38-49.
[10] DENG Y F, ZHANG W, CAO Z S. Experimental investigation on the ballistic performance of 45 steel metal plates subjected to impact by hemispherical-nosed projectiles[J]. Chinese Journal of High Pressure Physics, 2013, 27(6):915-920.
[11] 邓云飞. 弹靶结构及其材料性能对金属靶抗侵彻特性影响研究[D]. 哈尔滨:哈尔滨工业大学, 2012.
[12] 胡静,崔亚男,王轩,等. 单层金属板对刚性弹体抗撞击特性的影响因素研究[J]. 振动与冲击, 2017, 36(24): 35-43.
HU Jing, CUI Yanan,WANG Xuan, et al. The influence of the ballistic resistance of monolithic plate against rigid projectile[J]. Journal of Vibration and Shock, 2017, 36(24): 35-43.
[13] JOHNSON G R, COOK W H. Fracture characteristics of three metals subjected to various strains, strain rates, temperatures and pressures[J]. Engineering Fracture Mechanics, 1985, 21(1):31-48.
[14] TENG X, WIERZBICKI T. Effect of fracture criteria on high velocity perforation of thin beams[J]. International Journal of Computational Methods, 2004, 1(1):171-200.
[15] ZHANG W, WEI G, XIAO X K, et al. Effect of fracture criteria on Taylor impact fracture[J]. Journal of Harbin Institute of Technology, 2013, 20(1):63-67.
[16] COCKROFT M G, LATHAM D J. Ductility and the workability of metals[J]. Journal of the Institute of Metals, 1968, 96:33-39.
[17] 张伟, 肖新科, 魏刚. 7A04铝合金的本构关系和失效模型[J]. 爆炸与冲击, 2011, 31(1):81-87.
ZHANG Wei, XIAO Xinke, WEI Gang. Constitutive relation and fracture criterion of 7A04 aluminum alloy[J]. Explosion and Shock Waves, 2011, 31(1):81-87.
[18] 肖新科. 双层金属靶的抗侵彻性能和Taylor杆的变形与断裂[D]. 哈尔滨:哈尔滨工业大学, 2010.
[19] B?RVIK T, DEY S, CLAUSEN A H. Perforation resistance of five different high-strength steel plates subjected to small-arms projectiles[J]. International Journal of Impact Engineering, 2009, 36(7):948-964.
[20] B?RVIK T, HOPPERSTAD O S, PEDERSEN K O. Quasi-brittle fracture during structural impact of aa7075-t651 aluminium plates[J]. International Journal of Impact Engineering, 2010, 37(5): 537-551.
[21] RAKV?G K G, B?RVIK T, HOPPERSTAD O S. A numerical study on the deformation and fracture modes of steel projectiles during Taylor bar impact tests[J]. International Journal of Solids and Structures, 2014, 51:808-821.
张伟 男,博士,教授,博士生导师,1964年生
E-
文章来源:《固体力学学报》 网址: http://www.gtlxxbzz.cn/qikandaodu/2021/0226/445.html
上一篇:压缩载荷下织构对冷轧和退火板力学行为各向异
下一篇:健康加勤奋一生不虚度